Bridge mode

Set up and run sessions to send tokens from one network to another.

PreviousSettings & Launch NextBlock mode

Last updated 9 months ago

Bridge mode

Set up and run sessions to send tokens from one network to another.

Thanks to the Bridge mode, you can replenish wallet balances with native tokens for further activity in the desired network. Bridge mode allows bridging tokens from any available network to another, without being tied to the module's network.

In the Mode section, select Bridge Mode;
In the Run mode section, choose how wallets will be launched:
1. Parallel: wallets will operate concurrently (multithreaded) with or without proxies;
2. One-by-one: wallets will be launched one after another with or without proxies;
3. One-by-one (mobile proxy): wallets will be launched one after another using mobile proxies. Mobile proxies must first be added to the Settings -> section and linked to accounts in the .
To launch a pre-prepared group of wallets, select it in the Select Accounts group to launch section;
In the Bridge Type section, choose the bridge through which you want to send tokens. All modules offer several bridge options: official bridges and bridges from third-party developers;
If you want to send funds through an official bridge, select it from the list and proceed to configure it. Almost all official bridges work only with the Ethereum network. Therefore, to send ETH to L2 networks through official bridges, you must have ETH in your Ethereum network balance;
In the Account Delays section, set the delay between wallet launches in seconds;
Clicking on Pro opens the Gas guard setting. When activated, this delay ensures that your wallet will additionally pause if multiple accounts in the same session are ready to operate simultaneously after reaching the gas limit you set for the software operation. We implemented this to prevent all these wallets from sending transactions simultaneously after reaching the gas limit you set. The standard delay is set in the range of 30 to 150 seconds;
If you want to use the official Scroll network bridge for replenishment, in the Bridge mode field, there are two options offered by the official bridge itself:
1. Fast deposit to Scroll - a deposit in standard mode with standard fees;
2. Economy deposit to Scroll - allows sending tokens at a significant discount. This is achieved by aggregating transactions from multiple users into one, and the fee for this transaction is shared among all participants. It takes longer because it requires waiting for a certain number of other users who also want to send tokens through this mode, but it is significantly cheaper than the Fast option.
To withdraw tokens from the Scroll network to Ethereum, select the Withdraw mode.

If you are using a bridge from third-party developers or an official bridge that allows choosing other networks besides Ethereum, in the Chain from and to field in the first window, select the network from which tokens will be sent, and in the second window, select the network to which tokens will be sent;
When using the Rhino.fi bridge, token freezes within the bridge can occur due to its operational characteristics, and such incidents happen periodically. If this happens to you, it is necessary to withdraw tokens from the bridge to your desired network. To do this, after selecting the Rhino.fi bridge in the Bridge type under Choose mode, select Internal Rescue, and in the Chain from and to field, choose the network to which you want to withdraw tokens from the bridge.

Below the network selection fields, there are two informational panels: in Min amount, you can see the minimum amount for sending, and in the Trading fee field, the bridge fee is displayed, excluding gas fees;
Press Update Balances to view the current balances on the wallets;
Select the wallets you want to use in the session;
In the Amount section, there are three functions: All, Send range, and Leave range when using an official bridge, and two functions, Send range and Leave range, when using a bridge from third-party developers.
1. All - will transfer all available tokens on the wallet to the destination network;
2. Send range - allows you to send tokens within a specified range;
3. Leave range - lets you leave a specified range of tokens on the wallet and send only those above this range.
To enter the range of amounts into the necessary fields and click Apply to selected wallets. The amount for each wallet will be generated randomly within the specified range. You can see the amount applied to each wallet in the Amount to bridge field. In this field, you can also manually adjust the amount;
In the Max gas price section, set the maximum gas price for transactions on the Ethereum network. The software will wait for the gas to drop to the specified value before starting transactions. After launching the session, you can adjust the upper Gwei level in the Logs & Progress tab, under the Sessions subsection;
To enable wallets to start working in a random order, leave the Randomize wallets checkbox enabled;
To launch the wallets into operation, press Launch.

PreviousSettings & Launch NextBlock mode

Last updated 9 months ago

In the Mode section, select Bridge Mode;
In the Run mode section, choose how wallets will be launched:
1. Parallel: wallets will operate concurrently (multithreaded) with or without proxies;
2. One-by-one: wallets will be launched one after another with or without proxies;
3. One-by-one (mobile proxy): wallets will be launched one after another using mobile proxies. Mobile proxies must first be added to the Settings -> section and linked to accounts in the .
To launch a pre-prepared group of wallets, select it in the Select Accounts group to launch section;
In the Bridge Type section, choose the bridge through which you want to send tokens. All modules offer several bridge options: official bridges and bridges from third-party developers;
If you want to send funds through an official bridge, select it from the list and proceed to configure it. Almost all official bridges work only with the Ethereum network. Therefore, to send ETH to L2 networks through official bridges, you must have ETH in your Ethereum network balance;
In the Account Delays section, set the delay between wallet launches in seconds;
Clicking on Pro opens the Gas guard setting. When activated, this delay ensures that your wallet will additionally pause if multiple accounts in the same session are ready to operate simultaneously after reaching the gas limit you set for the software operation. We implemented this to prevent all these wallets from sending transactions simultaneously after reaching the gas limit you set. The standard delay is set in the range of 30 to 150 seconds;
If you want to use the official Scroll network bridge for replenishment, in the Bridge mode field, there are two options offered by the official bridge itself:
1. Fast deposit to Scroll - a deposit in standard mode with standard fees;
2. Economy deposit to Scroll - allows sending tokens at a significant discount. This is achieved by aggregating transactions from multiple users into one, and the fee for this transaction is shared among all participants. It takes longer because it requires waiting for a certain number of other users who also want to send tokens through this mode, but it is significantly cheaper than the Fast option.
To withdraw tokens from the Scroll network to Ethereum, select the Withdraw mode.

If you are using a bridge from third-party developers or an official bridge that allows choosing other networks besides Ethereum, in the Chain from and to field in the first window, select the network from which tokens will be sent, and in the second window, select the network to which tokens will be sent;
When using the Rhino.fi bridge, token freezes within the bridge can occur due to its operational characteristics, and such incidents happen periodically. If this happens to you, it is necessary to withdraw tokens from the bridge to your desired network. To do this, after selecting the Rhino.fi bridge in the Bridge type under Choose mode, select Internal Rescue, and in the Chain from and to field, choose the network to which you want to withdraw tokens from the bridge.

Below the network selection fields, there are two informational panels: in Min amount, you can see the minimum amount for sending, and in the Trading fee field, the bridge fee is displayed, excluding gas fees;
Press Update Balances to view the current balances on the wallets;
Select the wallets you want to use in the session;
In the Amount section, there are three functions: All, Send range, and Leave range when using an official bridge, and two functions, Send range and Leave range, when using a bridge from third-party developers.
1. All - will transfer all available tokens on the wallet to the destination network;
2. Send range - allows you to send tokens within a specified range;
3. Leave range - lets you leave a specified range of tokens on the wallet and send only those above this range.
To enter the range of amounts into the necessary fields and click Apply to selected wallets. The amount for each wallet will be generated randomly within the specified range. You can see the amount applied to each wallet in the Amount to bridge field. In this field, you can also manually adjust the amount;
In the Max gas price section, set the maximum gas price for transactions on the Ethereum network. The software will wait for the gas to drop to the specified value before starting transactions. After launching the session, you can adjust the upper Gwei level in the Logs & Progress tab, under the Sessions subsection;
To enable wallets to start working in a random order, leave the Randomize wallets checkbox enabled;
To launch the wallets into operation, press Launch.

Your wallets have been launched. You can track the process of work of your wallets in the section .